High-Performance Polymer
Manufacturing & Custom Engineering Capabilities

In demanding industries like aerospace, medical device, and semiconductor manufacturing, high-performance polymers support critical operations. Precision-machined polymer seals prevent fluid and gas leakage while maintaining system pressures and resisting severe chemical exposure, thermal stress, and continuous wear. At Texas Precision Polymers (TexPoly), we address these demands with seals and custom plastic components machined from polymers suited for demanding environments.

Our capabilities span custom plastic component manufacturing, from micro parts to seals up to 110 in. across. This page shows how we bring engineering and manufacturing together to take a project from concept to a finished, application-ready part.

Engineering-Driven Custom Plastic Component Manufacturing

Each plastic component we provide benefits from our engineering-driven support and plastic manufacturing capabilities. We can provide sealing systems for applications up to 600 °F (316 °C) or down to -459 °F (-273 °C), at pressures as high as 20,000 PSI, and surface speeds of up to 2,000 feet per minute, depending on seal design, material, hardware, and operating conditions. Below, see how this approach works in practice.

Application Engineering & Collaborative Seal Design Support

Application Engineering & Collaborative Seal Design Support

Each successful project starts with a concept and core operating requirements. TexPoly works with engineers to build around initial designs or demands of an application. For spring-energized sealing applications, for instance, we can optimize spring selection and help with custom design and analysis where required. This contributes to seal designs that account for factors such as media ingression, frictional heat, chemical compatibility, extrusion gaps, or system vibration.

Design & Rapid Prototyping

Design & Rapid Prototyping

Rapid prototyping shortens the distance between a concept and an approved part. We can model a design, machine a working prototype, and get it into your hands for evaluation before you commit to volume.

Because we run prototype work and high-volume production on the same floor, moving from a proven sample to full output does not mean restarting with a new supplier. That continuity protects your timeline when you are up against a tight product-to-market window.

Reverse Engineering for Legacy Component Replacement

Reverse Engineering for Legacy Component Replacement

If you have a worn part but no drawing, we can rebuild the specification from the part itself. Many customers come to us with an obsolete seal from a valve or pump that the original supplier no longer makes.

We measure the sample, document the geometry, and reproduce it – often in an alternative or upgraded material selected for the application’s operating conditions. We also build replacement seal assemblies for repairable valves and pumps across many market segments, reducing the need to retire aging equipment.

Precision Polymer Machining & Advanced Manufacturing Setup

Our polymer machining setup covers a size range that few machining facilities can offer under one roof, including multi-axis turning and milling. We machine to tight tolerances for repeatability and dimensional stability, and we machine in a controlled environment backed by ongoing process controls and operator training.

Tooling design and material-science know-how help us achieve clean, high-performance finishes on difficult polymers, and a detailed quality program aligns results across every run.

Precision Multi-</br>Axis Live Turning/</br>Milling
Precision Multi-
Axis Live Turning/
Milling

Precision Multi-
Axis Live Turning/
Milling

Multi-axis live turning and milling allow us to cut complex features in a single setup. Our live-axis lathes combine turning and milling so a part never has to move between machines. Fewer setups mean less stack-up error and tighter part-to-part repeatability. For prismatic features and complex geometries, our 3-axis and 4-axis mill centers complete the work.

Plastic Micro</br>Machining for</br>Complex Micro-</br>Components
Plastic Micro
Machining for
Complex Micro-
Components

Plastic Micro
Machining for
Complex Micro-
Components

With plastic micro machining, tolerances and material behavior can be unforgiving. We machine micro spring seals and components down to 0.020 inches (0.51 mm), delivering the tight-tolerance parts that medical devices and semiconductor equipment depend on.

We have several turning centers configured for this small-diameter work, where heat, deflection, and chip flow are managed simultaneously.

Large-Diameter</br>Machining for</br>Heavy-Duty</br>Polymer Solutions
Large-Diameter
Machining for
Heavy-Duty
Polymer Solutions

Large-Diameter
Machining for
Heavy-Duty
Polymer Solutions

Large high-performance polymer parts can be hard to source. At TexPoly, we take on large-diameter machining for heavy-duty polymer parts up to 110 in. (2,794 mm) in diameter. We can utilize CNC turning for oversized seals or wear rings, as well as for parts for large pumps, valves, and specific bearing systems.

Material Selection Consultation for Severe Environments

At TexPoly, we match polymers to chemistry, temperature, load, speed, and regulatory requirements, with batch testing and high-performance blends to meet the demands of harsh environments. Our material library of high-performance polymers supports a range of performance specifications:

PEEK and filled PEEK
PEEK and filled PEEK

PEEK and filled PEEK

Includes carbon-fiber, PTFE-filled, and blends. Unfilled PEEK has a continuous service temperature of approximately 480-500 °F (260 °C), depending on grade and application conditions, making it suitable for many elevated-temperature applications.

PTFE and filled PTFE
PTFE and filled PTFE

PTFE and filled PTFE

Virgin PTFE and modified grades offer reliable chemical resistance and low friction.

UHMWPE
UHMWPE

UHMWPE

Abrasion-resistant with grades for food and medical applications.

Nylon and POM (Delrin)
Nylon and POM (Delrin)

Nylon and POM (Delrin)

Engineering polymers for structural and wear parts.

FEP, PFA, PVDF, ECTFE, ETFE, and PCTFE
FEP, PFA, PVDF, ECTFE, ETFE, and PCTFE

FEP, PFA, PVDF, ECTFE, ETFE, and PCTFE

Fluoropolymers suitable for aggressive chemical service.

Thermoplastic elastomers and polyurethanes
Thermoplastic elastomers and polyurethanes

Thermoplastic elastomers and polyurethanes

80–95 Shore A grades available for softer sealing profiles.

For sour-gas (H2S), cryogenic, or high-pressure service, we help walk through the trade-offs with your team to optimize material performance in line with application requirements.

Industries Served

Our precision seals and components run in some of the most demanding equipment in the field. Examples of industries we cater to include:

Industrial Pumps, Valves</br>& Compressors
Industrial Pumps, Valves
& Compressors

Industrial Pumps, Valves
& Compressors

Sealing and wear parts for rotating and reciprocating equipment.

Oil & Gas and LNG/</br>Cryogenic
Oil & Gas and LNG/
Cryogenic

Oil & Gas and LNG/
Cryogenic

H2S seals, gate-valve seals, and components designed for applications ranging from elevated-temperature service to cryogenic conditions.

Aerospace & Defense
Aerospace & Defense

Aerospace & Defense

Components that meet tight tolerances and survive temperature and pressure extremes.

Medical Devices
Medical Devices

Medical Devices

FDA and biomedical grade materials where purity is crucial.

Semiconductor</br>Equipment
Semiconductor
Equipment

Semiconductor
Equipment

Fluoropolymer parts for chemically aggressive environments.

Power Generation
Power Generation

Power Generation

Plastic components built to specifications.

FAQ’s

How small of a part can TexPoly machine?

We machine micro spring seals and components down to 0.020 in. (0.51 mm) on turning centers configured for small-diameter work.

What is the largest diameter you can handle?

Up to 110 in. (2,794 mm) on our TL3 turning center, for oversized seals, wear rings, and bearings.

Can you make a seal if I only have a worn sample and no drawing?

Yes. TexPoly can reverse engineer the part. We measure the geometry and reproduce it, with alternative or upgraded materials available when appropriate for the application’s operating conditions.

Do you offer prototypes and production runs?

Yes. Our customers can validate a prototype and then scale to volume without changing suppliers.

Can you help choose the material, not just machine it?

Yes. Material selection consultation is part of our engineering support, matched to your chemistry, temperature, load, and any regulatory standard.

Partner with TexPoly for End-to-End High-Performance Polymer Engineering

TexPoly brings engineering support, material selection, and precision polymer machining under one roof. Our capabilities range from plastic micro machining to large-diameter components up to 110 in. across, and we produce precision seals and custom plastic components from concept through production.

Send us your drawing, sample, or operating conditions and let our engineers scope it with you. Contact us to start your custom plastic component manufacturing project.